In professional assembly, repair and maintenance work, not all surfaces react in the same way to an adhesive. Some materials have specific levels of porosity or flexibility that make it more difficult to achieve a uniform and durable bond.
For these applications, Magmont Cianofix Control offers a medium-viscosity cyanoacrylate formulated to provide precision, resistance and greater control throughout the bonding process.
Cyanoacrylate adhesives are known for creating fast and strong bonds on a wide range of materials. Within this product category, Cianofix Control is particularly suitable for applications that require an even distribution of the adhesive and careful control over the amount applied.
What is Cianofix Control?
Cianofix Control is a professional medium-viscosity adhesive developed for materials that can be difficult to bond. Its formulation promotes good product distribution across the surface and provides high mechanical resistance once the curing process has been completed.
Its viscosity, between 230 and 250 cps, offers a balanced consistency. It is not so fluid that it spreads uncontrollably, yet it retains enough flow to distribute correctly throughout the bonding area.
This characteristic allows professionals to work more precisely on assemblies, repairs and applications where the amount of adhesive deposited must be carefully controlled.
Which materials is it suitable for?
One of the main advantages of Cianofix Control is its versatility. It can be used to bond different materials, including:
- Metals.
- Plastics.
- Elastomers.
- Wood.
- Paper.
- Leather.
- Other porous materials.
This wide range of applications makes it a suitable solution for industrial production, manufacturing, carpentry, maintenance, technical repairs and certain craft projects.
Before application, it is advisable to check the compatibility of the adhesive with the specific material, especially when working with certain plastics, treated surfaces or delicate components.
Setting and curing times
Cianofix Control has an approximate setting time of between 5 and 20 seconds, depending on the type of material, the quantity applied and the environmental conditions.
This interval allows the parts to be positioned correctly and held together during the initial seconds without unnecessarily extending the assembly process.
Although the initial bond forms quickly, full curing takes approximately 24 hours. During this period, impacts, movement and mechanical stress that could affect the final strength of the bond should be avoided.
The adhesive is also colourless, helping to create a discreet finish when the correct quantity is applied.
Different sizes for different requirements
Cianofix Control is available in several sizes to suit both occasional applications and frequent professional use:
- 10 grams.
- 20 grams.
- 50 grams.
- 100 grams.
- 500 grams.
The needle applicator makes dosage easier and allows the product to be deposited exactly where it is needed. This level of precision helps prevent excess adhesive, improves cleanliness and optimises product consumption.
How to achieve a reliable bond
For the best results, surfaces must be clean, dry and free from dust, grease and other residues. Only the necessary amount should be applied, as an excessively thick layer does not always improve strength and may slow down the setting process.
After application, the parts should be positioned correctly and kept still for the recommended time. It is also important to consult the technical and safety data sheets, work in a well-ventilated area and use the protective equipment recommended by the manufacturer.
With Cianofix Control, Magmont provides a professional solution for achieving fast, precise and resistant bonds, even in projects involving materials that present greater adhesion challenges.